News Releases

  • Home
  • News Releases
  • Sony Semiconductor Solutions to Release Advanced 1/2-type CMOS Sensor for
    Mobile Applications Featuring Industry’s First*1 RB2×2 OCL Pixel Structure for Both
    High Resolution and AF Performance
    New pixel design and algorithm deliver more than 20% higher definition compared to Sony’s conventional product

The press releases on this website are provided for historical reference purposes only.
Please note that certain information may have changed since the date of release.

June 24, 2026

Sony Semiconductor Solutions to Release Advanced 1/2-type CMOS Sensor for
Mobile Applications Featuring Industry’s First*1 RB2×2 OCL Pixel Structure for Both
High Resolution and AF Performance
New pixel design and algorithm deliver more than 20% higher definition compared to Sony’s conventional product

Sony Semiconductor Solutions Corporation

Sony Semiconductor Solutions Corporation (Sony) today announced the upcoming release of the LYTIA 610, a 1/2-type approximately 64-effective megapixel CMOS image sensor with the RB2×2 On Chip Lens (OCL) pixel structure. This is the industry’s first*1 product with this pixel structure to be mass produced.

By combining the RB2×2 OCL pixel structure with dedicated array conversion processing (remosaicing) optimized for this structure, the new product achieves both improved resolution and excellent autofocusing (AF) performance at the same time. It offers more than 20% improvement in spatial resolution*2 compared to Sony’s conventional product with the same pixel size,*3 allowing telephoto cameras to capture subjects with fine detail.

The improved readout speed also enables 4K 120 fps video recording for the first time on Sony’s 1/2-type sensor. This reduces the performance gap with the large sensors used on main cameras and suppresses variations in image quality across multi-lens camera systems, enabling a more uniform shooting experience.

*1  Among CMOS image sensors. According to Sony’s research (as of announcement on June 24, 2026).
*2  Spatial resolution: An indicator used for evaluating image definition. This figure quantifies the level of detail at which thin, alternate black and white lines can be clearly distinguished. A higher value indicates a finer depiction of detail in the subject.
*3  Compared with the LYTIA 601 mobile CMOS image sensor with a 2×2 OCL construction and pixel size of 0.7 µm.

LYTIA 610 CMOS image sensor


Model nameMass-production shipment date

LYTIA 610 1/2-type 64-effective-megapixel*4 stacked
CMOS image sensor for mobile applications

End of June 2026
*4  Based on the image sensor effective pixel specification method.


Main Features
High resolution and AF performance achieved through the industry’s first*1 RB2×2 OCL pixel structure and dedicated algorithm

The RB2×2 OCL pixel structure features an optimal arrangement of a 1×1 OCL structure for ensuring high resolution and a 2×2 OCL structure for enhancing AF performance on a single sensor.

Sony’s technology for designing an optimal balance of lenses with different sizes and curvatures on a single surface, together with its high-precision manufacturing technologies, has enabled the coexistence of two types of OCL structures within a Quad Bayer array sensor. Specifically, G (green) pixels, which contribute to better image definition, utilize the 1×1 OCL structure with superior resolution performance. The 2×2 OCL structure, where four pixels share a single lens, is used on R (red) and B (blue) pixels to serve as phase difference detection pixels.

Furthermore, a new dedicated remosaicing (array conversion) processing algorithm was developed to further enhance the imaging performance of this unique pixel array. The optimized pixel structure and signal processing together deliver more than 20% improvement in spatial resolution compared to the conventional product*3 of the same pixel size, while maintaining superb AF performance.

Structural diagram of RB2×2 OCL

Spatial resolution comparison with Sony’s conventional product


Sony’s first 1/2-type sensor to support 4K 120 fps video recording
The logic circuits on this product employ fine processing for low energy consumption. Additionally, the AD converter (analog-to-digital conversion circuit) has been optimized through increased parallelization to achieve high-speed data readout that is double that of the conventional 1/2-type sensor.*3

The improved readout speed enables 4K 120 fps video recording for the first time on Sony’s sensor of the same size, which had been difficult to achieve with previous designs. This design makes it possible to record smooth videos of fast-moving subjects and superior-quality slow-motion videos. It also supports 4K 60 fps HDR video recording, which is ideal for capturing high-contrast scenes.

These improvements in video performance reduce differences in image quality and appearance when switching between main and sub cameras, enabling smooth transitions across multi-lens camera systems for seamless video shooting experiences.

Slow-motion Sample (4K 120 fps)


Related Link
For more information on LYTIA, the Sony’s mobile image sensor brand, please visit the LYTIA brand site:
https://www.sony-semicon.com/en/products/is/mobile/index.html


Key Specifications
Model name

LYTIA 610

Image size

1/2.0-type (diagonal 8.095 mm)

Effective pixels

Approx. 64 megapixels

Unit cell size

0.7 µm × 0.7 µm (H × V)

Color filter

Quad Bayer Coding

OCL pattern

RB2×2 OCL




Frame rate
64 Megapixels (4:3)

24 fps

16 Megapixels (4:3)

60 fps
30 fps (DAG-HDR)

4K2K (16:9)

120 fps
60 fps (DAG-HDR)



Power supply

Analog

2.8 v/1.8 v

Digital

0.81 v

Interface

1.8 v or 1.2 v

Output interface

MIPI® C-PHY 2/3 trio, Max. 4.5Gsps/trio
MIPI D-PHY 2/4 lane, Max. 2.5Gbps/lane


*  LYTIA and the LYTIA logo are registered trademarks or trademarks of Sony Group Corporation.
*  All product and service names that appear in this announcement are the trademarks or registered trademarks of their respective owners.

Contact Us

For inquiries about Sony Semiconductor Solutions Group and products / solutions, specifications, quotation / purchase requests, etc., please contact us using the Inquiry form from the button below.